EDIT : I’m going to use a Lenovo P500 (at around $130) with 8 threads (will upgrade it later) and 64gb of RAM. It support the E5 v4 family so that’s great. If someone knows the power consumption, that would be cool!

Hello, I want to build a “homelab” and I’m searching for a server, what do you propose me as good options? I need something with at least 64gb RAM, can buy used, and minimum 16vcores… Around 150$ If you have any good options let’s comment below 👇 THX ❤

    • seang96@spgrn.com
      link
      fedilink
      English
      arrow-up
      10
      ·
      7 months ago

      The hidden cost of power usage could be a lot more expensive then something more modern though lol

      • Celestus@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        ·
        7 months ago

        Agreed. 100% would not recommend going this route for a homelab, but it does meet every specified requirement

        • seang96@spgrn.com
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          7 months ago

          https://psref.lenovo.com/syspool/Sys/PDF/ThinkStation/ThinkStation_P500/ThinkStation_P500_Spec.PDF

          Got a 490W or 650W PSU. Looks like the CPU is probably around 9-10 years. I’d say probably not much. I bet it’s idling would be around 120-200W depending on # of disks, disk type, and if your using the PCI slots.

          For reference I’m running 4 Intel NUC11i7s, $400/unit bare metal, 64GB ram (2x32) $120-$130, and the most expensive part is the flash storage I am buying to fit my needs. Power on these are like 10W idle and max is like 60W each when using turbo.

          • foremanguy@lemmy.mlOP
            link
            fedilink
            arrow-up
            2
            arrow-down
            1
            ·
            7 months ago

            do you think that this thing would be around 150W?? I think more about 50W Max, for example the cpu is relatively low-power

            • redcalcium@lemmy.institute
              link
              fedilink
              English
              arrow-up
              3
              ·
              edit-2
              7 months ago

              For comparison, I run a thinkstation p300 with i7-4790 (TDP 84W) 24/7 and the power usage looks like this:

              Even when idling this old processor still guzzles 45W. Certainly not as nice as GP’s that only use 10W during idle.

              • foremanguy@lemmy.mlOP
                link
                fedilink
                English
                arrow-up
                1
                arrow-down
                1
                ·
                7 months ago

                Do you think it would be better to go to an consumer cpu instead of a xeon?

                • seang96@spgrn.com
                  link
                  fedilink
                  English
                  arrow-up
                  0
                  ·
                  7 months ago

                  Server CPUs are built for the workload (hosting / background services) rather than desktop applications for consumer PCs. That being said generally your going to be more limited in disk / ram than CPU unless if you have some specific needs.

                  In my setup, my server resources are averaging 10% cpu, 54% memory, and ~70% storage. I’m running 4 PCs, 8 cores each so 32 cores, currently on memory I got 2x64GB and 2x16GB so 160GB ram. Between CPU and RAM I am utilizing basically 3.2 cores worth of processing and 86GB of ram. Most of my ram is going to postgres databases for speed improvement and it takes off load from the CPU.

            • seang96@spgrn.com
              link
              fedilink
              English
              arrow-up
              0
              ·
              7 months ago

              I am not the best at estimating power usage but like I said depends on the configuration it has. That’s just CPU, not including powering everything else so it’s idle load will be higher. RAM, disks, type of disk, amount of disks, GPU or other PCI cards, etc every additional component adds to the idle watt usage.

              • foremanguy@lemmy.mlOP
                link
                fedilink
                English
                arrow-up
                1
                arrow-down
                2
                ·
                7 months ago

                for sure but even with all my stuff I think that something like that would draw around 40-50W idle and up to 90W running

    • redcalcium@lemmy.institute
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      7 months ago

      Xeon E5-2670, with 115W TDP, which means 2x115=230W for the processor alone. with 8 ram modules @ ~3W each, it’ll going to guzzle ~250W when under some loads, while screaming like a jet engine. Assuming $0.12/kwh, that’s $262.8 per year for electricity alone.

      Would be great if you have an isolated server room to contain the noise and cheap electricity, but more modern workstation should use at least 1/4 of electricity or even less.

      • foremanguy@lemmy.mlOP
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        2
        ·
        7 months ago

        I just want to correct something is that the TDP is the power under load, so if the cpu is not 100% used it could be 20 hours at 25W and 4 at 90W

        • redcalcium@lemmy.institute
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 months ago

          Power scaling for these old CPU is not great though. Mine is slightly newer and on idle it still uses 50% of the TDP.

    • Appoxo@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      Wouldnt bother with Gen8. We literally throw them in the e-waste recycle bin.
      Either get a Gen9 if tight with cash (also EOL) or Gen10 servers which are currently supported and get current updates.