I also installed Bazzite and am missing several things (or at least have to do more research than I’d like to figure them out). Getting my peripherals working, CAD, system backups, pdfs that won’t open from my file server, etc. The more I get into it the more problems I uncover. It has not been the seamless transition that so many make it out to be. It has worked for the games I’ve tried though.
Depends on your personal needs, especially as it pertains to software and peripherals. Like I have a commercial printer at my workplace that has no Linux drivers, but yeah, absolutely, try a LiveUSB, and make sure it works with yours.
I’ve been… Struggling with FreeCAD for a while. I really want to support it, you know, open source and all, but it’s really rough. Something that takes 10 minutes in SOLIDWORKS takes at least one hour in FreeCAD, not accounting for crashes, and complexity increases time exponentially.
Importing and placing .step files is rather difficult, big assemblies tend to degenerate despite careful binding; I try to bind to the origin as much as possible, often sacrificing adaptability, but it still gets messed up after a while.
I’ve tried FreeCad on several systems and have yet to get it to run well enough to even attempt to use it. It either crashes constantly or just runs like ass.
On mine it was slow from the start. I’d click on a button and it would take 30-45 seconds to do anything. Every time. It took me like 4-5 minutes just to sketch a single rectangle.
I see. Well, at least you’ve tried. In this case, you either need a VM or dual boot at worst. It’s getting loosing up but professional programs will continue to be a pain for a while. Usually we get paid software alternatives rather than their Linux versions though. I hope EU can break this and these corporations get big customers who use Linux, so they end up making a Linux version as well. Otherwise we’ll need another good alternative to pop up or FOSS projects getting big donations like Godot had.
I do keep trying, but I miss what I’m used to. I’ve tried a VM but it’s too slow, and I fought with GPU Passthrough but gave up. I do hope the whole Trump situation pushes the EU to support Linux more, but I’m not holding my breath.
They’re late to the party but better late than never. Unless something happens radically, I don’t see these issues will be fixed until the next Windows version at least. Dual boot it is until then. I wish people noticed this before Trump.
Installed Bazzite yesterday. Not missing a single thing from windows at the moment.
Go ahead. It’s time.
I also installed Bazzite and am missing several things (or at least have to do more research than I’d like to figure them out). Getting my peripherals working, CAD, system backups, pdfs that won’t open from my file server, etc. The more I get into it the more problems I uncover. It has not been the seamless transition that so many make it out to be. It has worked for the games I’ve tried though.
Depends on your personal needs, especially as it pertains to software and peripherals. Like I have a commercial printer at my workplace that has no Linux drivers, but yeah, absolutely, try a LiveUSB, and make sure it works with yours.
I’m missing SOLIDWORKS after converting my last Windows PC to Linux
Don’t know about your workflow but have you tried FreeCAD? It surely won’t be like Solidworks, but might work for you.
I’ve been… Struggling with FreeCAD for a while. I really want to support it, you know, open source and all, but it’s really rough. Something that takes 10 minutes in SOLIDWORKS takes at least one hour in FreeCAD, not accounting for crashes, and complexity increases time exponentially.
Importing and placing .step files is rather difficult, big assemblies tend to degenerate despite careful binding; I try to bind to the origin as much as possible, often sacrificing adaptability, but it still gets messed up after a while.
I’ve tried FreeCad on several systems and have yet to get it to run well enough to even attempt to use it. It either crashes constantly or just runs like ass.
It slows down A LOT over time, the bigger the file, the faster, it seems… I close and reopen it often, luckily it launches in an instant
On mine it was slow from the start. I’d click on a button and it would take 30-45 seconds to do anything. Every time. It took me like 4-5 minutes just to sketch a single rectangle.
Weird. That’s one issue I didn’t have, luckily.
Have you tried it since 1.0? It’s pretty ok.
What keeps me from making the switch is music-making. None of my plugins run on Linux and sound drivers supposedly are a huge mess.
Yeah, unfortunately 1.0 is the version I’m talking about
I see. Well, at least you’ve tried. In this case, you either need a VM or dual boot at worst. It’s getting loosing up but professional programs will continue to be a pain for a while. Usually we get paid software alternatives rather than their Linux versions though. I hope EU can break this and these corporations get big customers who use Linux, so they end up making a Linux version as well. Otherwise we’ll need another good alternative to pop up or FOSS projects getting big donations like Godot had.
I do keep trying, but I miss what I’m used to. I’ve tried a VM but it’s too slow, and I fought with GPU Passthrough but gave up. I do hope the whole Trump situation pushes the EU to support Linux more, but I’m not holding my breath.
They’re late to the party but better late than never. Unless something happens radically, I don’t see these issues will be fixed until the next Windows version at least. Dual boot it is until then. I wish people noticed this before Trump.
I too did an install on an old laptop just to check it out. It does throw an overwhelming number of options at you on first start.