Why didn’t they just open it with a screwdriver and pry bar? Or steal the whole bus stop?
Man steps into bus whole bus stop on his back. Bus driver doesn’t even flinch. Happens every day.
Get a long industrial chain, tie it around the display, drag the whole thing away with a truck. Drag all the way out to the middle of nowhere and then take your time figuring out how to break, take part, cut, burn, explode or destroy the glass.
Box truck with Faraday cage for blocking gps.
This reminds me of that breaking bad episode.
This sounds like an absolutely terrible idea. Aside from the people that will hurt themselves trying to break that glass, it’s a public bus stop. People will hurt bystanders and damage the bus stop and make it in general a place no one wants to be because of idiots constantly hurling stuff around or kicking it while you’re trying to wait for the bus.
If I was driving the bus I would just brake a little too late when arriving at that stop.
Story goes that it was only up for an incredibly brief window (heh) and that tools were disallowed for all of the pre-screened participants of the competition. Supposedly, even with all of these measures in place, something still went wrong with the glass, causing the competition to run short.
Not the glass, the metal frame was being slowly destroyed though.
so who won
Some marketing agency
Who’s next?
Good name. You’re doing good work!
Source pls
This was a good reminder to check a link before to click
URL check saves me once again. I can’t believe how many people just raw dog links.
I like to think of myself as a teacher first, prankster second
Thank you. It was quite an interesting read
Why even participate in online discussion
Takes just about as long to type a query into Google as it does to type “source please” and wait there with your hand out
See my previous comment
Find a spark plug, crumble, embed in shoe sole by stepping on it, jumpkick glass, become legend.
That helps with the glass, but bulletproof glass uses multiple polymer layers and tempered glass layers alternating.
So you would only get through the top glass layer and do nothing to the polymer layers or 2nd layer of glass.
aren’t there any methods, like some big hammer to smack it after you break that layer. you have all the time in the world, i wonder if it pays out to travel there smack the glass and take 3mil$
The problem is that glass absorbs energy to break, polymer deforms to absorb energy. So you have something absorbing energy in two different ways that robs kinetic energy very well.
Even just a normal household double pane window with one thin layer of polymer on both panes will take a long time to bust through with a hammer if the outer polymer is bonded to the frame appropriately. If you put paper tightly between both panes top to bottom, you would be in for a task because the paper reenforces against the deflection the hammer imparts.
You aren’t allowed to use tools with the money case, but ignoring that, you could shoot it with a .50 cal AP round towards the top and almost certainly make it through and then you just hammer and crowbar down to get the cash by peeling away the glass.
The other way you could attack it is to just drive a car at the far side from the support and hopefully peel the glass away from the frame enough to get in.
Even taking a hammer to it would be a laborious task to make any meaningful progress in a reasonable amount of time. A pickaxe would be useful, a framing hammer face less so.
an angle grinder would be a much better choice than hammers
Yes, with a respirator.
well, better as in more effective.
Just don’t forget to engage the safety squints.
Hammer drills are basically “small” jack hammers that can also operate as a drill. Put it in hammer mode and repeated chisel at it. it’ll take some time, but eventually the glass will be broken and you can then deal with the polymer layers by yanking.
The ceramic edges of broken spark plugs are really good at breaking tempered glass, but tempered glass is on a certain sense the opposite of bullet proof glass.
Some of those Minnesota studded shoes would help. Can’t go slipping on the ice, can we, best to be prepared.
They should’ve tried doing this in Romania, the entire bus stop would have disappeared overnight…
Half of Europe: Romanians steal everything!
Otther half of Europe: Czechs steal everything!You’re right, systemic theft (corporate and institutional) is way more damaging than petty theft and people don’t talk about it nearly enough. Both occur at different rates in different countries but mostly based on opportunity, not culture.
Yeah… doesn’t matter who we are… Romanians, Czechs, Germans, Americans, whatever… All of the same flesh.
We’ll just keep returning here, over and over again, as long as we let greed and hate drive us. The tools are not to blame, it’s the hands which use them that are.
I was so certain the link would lead to the website of the British Museum.
Yeah, it was unfair of me to propagate the stereotype (speaking as a Romanian myself). We have a lot of good people around here, who’re just doing their best to be decent and get by.
But it’s not easy being an honest citizen in a country where the most prolific thieves are the people who’re supposed to govern it… Corruption has been the main thing plaguing these lands ever since the Revolution, when the profiteers saw an opportunity to sell this country for parts…
To be clear, I’m not siding with the former “Communist” regime, which was a Totalitarian cesspit all in all, but I sure as fuck don’t agree with the mockery of Democracy which came after that, either…
Edit: thank you so much for the article! As far as I’m concerned (and I’m sure this applies to a lot of my fellow compatriots), everyone on our lands is a Romanian. That has been one of our greatest virtues as a people, we accepted everyone among us. Sure, not everyone has noble intentions, but people are just people and they deserve to be given a chance. Too bad we’ve grown so hostile and closed-minded over time… God damn it, this hurts… We have such a rich history of persevering through oppression, only to be pushed toward being oppressors. And it’s not the citizenry’s fault, our “leaders” have pushed us to the brink…
And no one went up to it with an angle grinder? Pretty sure you can cut it with a diamond blade.
the plastic in the lamination would foul it.
Personally… I would have gotten a hammer-drill and put a chisle bit on it. It’ll take time but you’ll get there. Alternatively, I’d attack the seam around it (Cutter spreader should take that nicely.) (you can rent a hammer drill for like… 50 bucks. and I know you can rent various types of cutter spreaders, too.)
If my memory is correct there’s a guard just out of frame that was preventing that stuff.
Go on facebook marketplace, buy cheapest car near me that runs rhe have “car accident” in the wee hours.
Your comment is the fifth from the top in my view. And I had already decided to crash a car without airbags into the sign. Why wait for the wee hours? Just do it®
Legit? Theres been several incidences worldwide of people driving cars into crowds of people and I dont want to get accused of domestic terrorism or have to beat a bunch of public endangerment charges in court.
I mean its 3 MILLION DOLLARS! but its also only 3 million dollars. If I have to replace the bus stop, pay a bunch of lawyer fees, have my licence revoked for a year or two, possibly have charges on my record that would make it hard to get a job… Its “life just got a lot easier” money but not quite “Set for life”
Theres been several incidences worldwide of people driving cars into crowds of people and I dont want to get accused of domestic terrorism or have to beat a bunch of public endangerment charges in court.
OK, that’s true, I hadn’t considered that part of it. But as I said it was a quite fast idea.
PR, only installed for the photoshoot, if that.
Bulletproof glass, but they didn’t allow tools? Is this the company that made glass for the cybertruck?
3M bulletproof* glass.
*kickproof
I think bullet proof is only part of the urban legend piece of the story. It says security glass and snopes did not use the term bullet proof either.
The marketing stunt came to a halt after just one day when the security guard noticed the metal frame of the glass case had been weakened from the constant barrage of physical pressure.
** Kickproof™ is a trademark name of 3M Corporation. all kicks are performed by trained professionals; not resistant to kicking; consult with your doctor before trying
That’s the point.
They didn’t want anyone to be actually able to get the money.
Can’t you get like, a diamond drill bit and just give it a light tap? Tempered glass breaks easily if the outside layer is compromised.
Bullet proof “glass” isn’t just tempered glass in fact it never was the original was just glass layered with plastic but the new stuff is made from multiple layers of different materials each specialized to cover the others weakness, think fascism literally means to fassen together like a bundle of sticks that is harder to break than one stick(I don’t know why my mind went to fascism in retrospect a yin yang would be more accurate anyways)
Laminates are pretty common in many applications. Lots of things built from wood use several layers glued together. Or think of a lasagna.
Laminates are pretty common in many applications. Lots of things built from wood use several layers glued together. Or think of a lasagna.
Or an ogre?
They didn’t allow tools. I wonder if those metal sole insert things could be used to help go through this.
Just embed a tip in-between the ridges of a boot.
Have they tried shooting it?
Well, I’d give it a shot at least
Yeah, but after you’ve taken a shot of vodka, what are you going to do about the money?
You’re mistaken. They want to give the vodka to the glass.
You put the lime in the coke, YOU NUT!
I call BS. There are still tools and ways you could easily break through it. Plenty of which are far better than just kicking it.
There was a guard. It was only $500. People were invited to kick it, but it was monitored.
Ah, I’m going to miss Snopes in the post-truth society. :(
No no no. Chop chop master onion head taught me everything I need to know.
Kick punch it’s all in the mind, if ya wanna test me, I’m sure you’ll find, the things I teach ya are sure to beat ya! Nevertheless you get a lesson from teacher! Now…
KICK!
Step on the gas.
…O…O…O…X…
Dremel with a diamond drill bit would make quick work of that
If it’s 3 million dollars, my car at 30mph should handle it.
Pretty much any tool with a cutting surface made of tungsten, high speed steel, or industrial diamond.
But one source I found says they only let people use their feet.
If they’re only allowing kicking, you should use a 50cal shoe!
And nobody thought to install some glass breakers on the bottom of their boots?
Edit: Hell, I’d even consider wedging a nice sharp piece of quartz into the tread of a boot.
Bullet proof glass is plexiglass/polycarbonate, so I don’t think a glass breaker would help.
This isn’t plexiglass, it seems to just be laminated glass
Hmm, bullet proof glass is plexi/polycarb, so I wonder why they’re advertising it as such.
I don’t think they were advertising it that way, the label in the picture says security glass. The reddit post is just poorly titled.
What about spiked cleats?
It’s like an inch thick plastic, so I doubt that would help. I think that’s what they make the overlook sky balconys out of, so it’s pretty resilient. Maybe you could whittle away at it with metal cleats over time? But I think they would probably kick you out first.
Oddly enough having lots of spikes hurts your chances by spreading the force over more area. You’d really just want a single small spike.
Bus stop.
Bus.
Pretty sure if the bus went at it fast enough backwards it would do better than some clown and his size 11s
You should be able to bust it open using liquid nitrogen and warn water. I don’t think that the glass is made for being able to tank temperature differences of over 200°C
A crowbar to the side is what eventually broke it open.
